VAT Invoice Available on Request. Onkyo TX-SR606 7.1 Home Cinema. 5x HDMI, THX, Dolby True HD.
Ex Display product from major UK HiFi store, Fully tested-May carry lights marks or signs of use. Comes in replacement box and packing. Power lead, free hdmi cable and remote control.
No other parts or accessories included. 90 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD. Dolby® TrueHD, DTS-HD Master Audio, Dolby® Digital Plus, DTS-HD High Resolution Audio, Dolby Digital EX, DTS-ES®, Pro Logic® IIx, and DTS Neo:6 decoding.SIRIUS satellite radio capable (requires SIRIUS subscription and optional SiriusConnect home tuner kit). Audyssey 2EQ auto speaker setup (microphone included).
Audyssey Dynamic EQ for better surround sound at lower volumes. Dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room).RIHD (Remote Interactive over HDMI) simplifies system control with compatible Onkyo components. Back surround speaker channels re-assignable for bi-amping front left and right speakers. 192kHz/24-bit digital-to-analog converters for all channels. 17-1/8"W x 6-7/8"H x 15-1/16D. 1080p-compatible HDMI digital video switching (4 in, 1 out). HDMI version 1.3a with support for.
And HDMI-CEC with compatible video sources and TVs, Auto Lip Sync. Analog-to-HDMI video upconversion with scaling up to 1080i.
Component video switching: 2 in, 1 out. Digital inputs: 2 optical , 2 coaxial. 1 front-panel input with composite video. 4 rear-panel inputs with composite and S-video. 7.1-channel analog audio preamp input.
1 pair of main speaker outputs. HDCP 2.2 for 4K Video. From Component Video to HDMI. WRAT (Wide Range Amplifier Technology). Using the CinemaFilter you soften overly bright movie soundtracks.Movie soundtracks are typically mixed for a large theater (relative to your home theater) with lots of soft seats and thick curtains on the walls. Home theater settings often lack these high frequency absorbing wall treatments, making the soundtrack sound too bright. CinemaFilter accounts for this and for many movies sounds more natural at home. To decode and playback high-resolution recordings, this receiver is equipped with 192kHz/24-bit DACs.
The TX-SR606 has four HDMI v1.3a inputs and one HDMI v1.3a output for connecting DVD players, HDTV set-top boxes, and other video components to your TV or projector. The receiver's HDMI circuitry allows the receiver to output an HDMI audio signal from its speaker outputs and HDMI out so you don't have to run and additional analog or digital cable. The HDMI inputs are also compatible with DVI, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable, along with audio cables. The receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components can display the picture.
The HDMI inputs can accept and switch 480i, 480p, 720p, 1080i, and 1080p signals to a TV, monitor, or projector. Each of the HDMI inputs can be assigned to any of the four rear panel A/V inputs (DVD, VCR/DVR, CBL/SAT, Game/TV).
The receiver's HDMI input also supports the following functions. Increases detail and color space when watching movies on your television from an external device connected by HDMI through the TX-SR606. The Lip Sync function can automatically synchronize HDMI audio and video that has gotten out of sync due to the complex digital video processing being performed by your HDMI-compatible TV. With HDMI Lip Sync, the audio delay required to synchronize the audio and video is calculated and applied automatically by the AV receiver. This function allows CEC-compatible components or RIHD-compatible components connected via HDMI to be controlled with the TX-SR606.
This feature allows you to link the power functions of CEC-compatible components or RIHD-compatible components connected via HDMI. This function enables you to control this AV receiver from an RIHD-compatible TV connected via HDMI. HDMI Video Upconversion With Upscaling. The Onkyo TX-SR606 will convert incoming analog composite video, S-video, and component video signals to HDMI so you can connect all your video sources through the receiver and then to your TV via HDMI to give you the best picture quality possible.Using Faroudja DCDi Edge Technology, the receiver has the ability upscale incoming analog and digital video signals up to 1080i. You can specify the output resolution for the receiver's HDMI output and have the AV receiver upconvert and upscale the picture resolution as necessary to match the resolution supported by your television. You can select from 480p, 720p, 1080i, Auto or Through. In addition to HDMI, composite video, and S-Video switching, this unit can switch between high definition component video sources.
There are 2 component video inputs and 1 component video output. The component video inputs and outputs have a bandwidth of 5Hz to 50MHz. The Front L/R and Surround Back L/R terminal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide separate tweeter and woofer feeds for the front speaker, providing improved bass and treble performance. When the bi-amp feature is used, the AV receiver is able to drive up to 5.1 speakers in the main room.The TX-SR606 features the following Zone 2 connections so you can listen to one input source in your main room and a different source in another room. By using the line-level outputs on the TX-SR606 you can connect an external receiver or integrated amplifier in a second room, allowing you to listen to 7.1 surround in the main room and play a different audio source in another room of your home.
The volume of Zone 2 is controlled by your optional integrated amp. By using the speaker-level outputs on the TX-SR606 you can directly connect a secondary pair of speakers in another room of your home, allowing you to listen to 5.1 surround sound in your main room and play a different audio source in the other room. The volume of Zone 2 is controlled by the TX-SR606 receiver. The DS-A2x or DS-A3 Remote Interactive Dock for iPod (item # 580DSA2X and 580DSA3) provide an interface between an iPod digital media player and Onkyo TX-SR606. Once the iPod is docked you can control basic functions such as volume control, play, stop, and skip via the Onkyo system's RI-compatible wireless remote control.
The dock also charges the battery in the iPod, and allows you to view digital photos and video on an Onkyo home theater system. You can search Sirius radio stations by Channel, Category or Direct Tuning. You can also choose to display the following Sirius information on the receiver's display - Channel Name, Channel Number, Category Name, Artist Name or Song Title. Audyssey 2EQ Automatic Speaker Setup. With the supplied speaker setup microphone, Audyssey 2EQ can measure the number of speakers connected, their sizes, crossover frequencies and distances front he listening position and calculate the optimal speaker setting for you automatically.The supplied microphone is approximately 2" in diameter, 1" tall, and has a 19.5' cable that plugs into the front of the receiver. There is a threaded insert on the bottom of the microphone so it can be mounted on a tripod for accurate listening position placement. Three listening position measurements are taken, one primary and two secondary, to optimize the surround effect for a broad area. You can also setup your speaker system manually using the receiver.
You can set Large or Small for your front speakers; Large, Small or None for your surround, surround back, and center speakers; and Yes or No for subwoofer. You can also select 1ch or 2ch mode for the connected surround back speakers.
The distance from your listening position to each speaker can also be set manually. The front speaker distance can be set from 1 to 30 feet in 1-foot increments. The center and subwoofer settings can be up to 5 feet more or 5 feet less than the distance you set for the front speakers (30 feet max).
The settings for the surround left, surround right, surround back left, and surround back right speakers are each individually adjustable, and they may be up to 5 feet more or 15 feet less than the distance you set for the front speakers (30 feet max). You can manually adjust the level of individual speakers between -12dB and +12dB; -15dB to +12dB for the subwoofer. Equalizer: You can adjust the receivers 5-band equalizer (63, 240, 1000, 4000, and16000 Hz) for each speaker manually from -6 to +6dB in 1dB increments. This receiver has a built-in high-pass crossover for any of the speakers set to Small. This setting is available when the subwoofer is set to Yes.
The frequencies that you can choose from are 40, 50, 60, 80, 100, 120, 150, and 200 Hz. Frequencies lower than the set crossover point are output by the subwoofer. You can independently adjust the Bass (50Hz) and Treble (20kHz) of the TX-SR606 from -10 to +10 dB.You can enhance the bass output by activating the Double Bass function. This function allows you to feed bass frequencies to the front left and right channels and to the subwoofer. Double Bass can be set only when the subwoofer is set to On and the front speakers are set to Large. Listening Modes: This receiver incorporates a wide variety of listening modes to bring you maximum enjoyment from your audio and video software. This mode delivers pure sound with minimum sound quality adjustment and filtration. The sound recorded for the right and left front channels is output to the right and left front speakers only and not output to the subwoofer, center, or rear speakers. Sound is output from the front left and right speakers and subwoofer. Monaural sound is output from the front left and right speakers and subwoofer. Dolby Pro Logic II technology processes any high quality stereo (two-channel) movie and music audio into five playback channels of full-bandwidth surround sound. A matrix surround decoding technology, Dolby Pro Logic II detects the directional cues that occur naturally in stereo content and uses these elements to create a five-channel surround sound playback experience.
You can choose from the following Dolby Pro Logic II formats - Cinema, Music, or Game. Pro Logic IIx expands any existing stereo- or 5.1-channel audio for a 6.1- or 7.1- channel playback, creating a seamless, natural surround soundfield that immerses you in the entertainment experience. You can choose from the following Dolby Pro Logic IIx formats - Cinema, Music, or Game.
Dolby Digital: decodes Dolby Digital soundtracks. Dolby Digital is a 5.1 multi-channel digital surround format. Dolby Digital EX is a 6.1 multi-channel digital surround format. Multi-channel audio format for HDTV and Blue-ray which supports up to 71.Channels with 48kHz sampling rate. Offers up to 7.1 discrete channels of digital audio with 48/96kHz and up to 5.1-channels with 192kHz sampling rate. Expands 5.1-channel sources for 6.1 or 7.1-channel playback, adding an extra dimension and provides an enveloping surround sound effect. 5.1-Channel Source+PLIIx (Movie or Music). Expands 5.1-channel Dolby Digital sources to 6.1 or 7.1-channels.
DTS Digital Surround is a 5.1 multi-channel digital surround sound format used for both commercial/theatrical and consumer grade applications. DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization of DVD-video. DTS-ES Extended Surround: DTS-ES features two 6.1 multi-channel formats. DTS-ES Discrete 6.1-channel is a 6.1-channel discrete digital audio format adding a surround back channel to the DTS digital surround sound. DTS-ES Matrix 6.1-channel is a discrete 6.1 channel digital audio format inserting a surround back channel to the DTS surround sound through matrix encoding.
DTS Neo:6 is a matrix decoding technology for achieving 6.1-channel surround playback with 2-channel sources. You can choose from two DTS Neo: 6 Surround formats - Neo: 6 Cinema and Neo: 6 Music. Multi-channel audio DTS format which support up to 7.1 channels with 96kHz sampling rate. Supports up to 5.1 channels and a lower sampling rate of 48kHz. This mode can be used with SACDs that feature multi-channel audio.
5.1Ch Source + Neo:6. This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel playback.
Enjoy virtual 5.1 surround with two or three speakers Onkyo's exclusive. Theater-Dimensional circuitry takes the complexity out of conventional surround-sound setups and lets you experience the excitement of surround sound from as few as two ordinary speakers. Theater-Dimensional's unique multi-speaker modes let you place up to five speakers conveniently by the TV, for the most realistic virtual-surround sound possible. Suitable for old movies or other mono sources. For classical or operatic music.
For acoustic instruments, vocals, and jazz. Suitable for rock or pop. Adds realistic acoustics to TV shows.
All speakers output the same sound in mono. Dolby Pro Logic II & IIx Music Modes. While listening in the Dolby Pro Logic II or IIx Music format, there are three further enhancements you can adjust. Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu. Allows you to move the sound field forward or backward.Center Width: allows you to adjust the width of the center channel. In the DTS Neo:6 Music mode, the Center Image feature adjusts the output of the left and right channels relative to the center channel, allowing you to make the center channel more or less dominant as needed. This improves the image of the center channel, especially when the listener is off-center. Adjustment varies from 5 (nothing subtracted from the L/R channels) to 0 (L/R channel output is cut in half). The Late Night feature limits the dynamic range of Dolby Digital recordings. Limiting the dynamic range makes it easier to find a volume that ensures the quiet sounds are not too quiet and the loud sounds are not too loud for night time listening. This allows you to comfortably listen to without the need to constantly adjust the volume to keep from waking family/neighbors. The choices are: Off, Low, and High. This feature only works with Dolby Digital Encoded software and the depth of the feature will vary based on the individual software package. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the best possible frequency response and surround levels moment-by-moment as volume is changed.
The result is bass response, tonal balance and surround impression that remain constant despite changes in volume. Audyssey Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution.Audyssey Dynamic EQ works in tandem with Audyssey (2EQ, MultEQ, MultEQ XT) to provide well-balanced sound for every listener at any volume level. The Music Optimizer function enhances the sound quality of compressed music files. The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48kHz and analog input signals. Occasionally the audio and video signals are not properly synchronized, typically when using a progressive scanning DVD player. You can correct this by delaying the audio; options are 0 (no delay) to 100 milliseconds, in 20 millisecond steps. With IntelliVolume, you can set the input level for each input selector individually from -12 to +12 dB in 1 dB increments. The receiver is equipped with a 7.1 multi-channel input for compatibility with external decoders or high resolution audio players such as DVD-Audio or SACD. The input consists of left front, right front, center, subwoofer, left surround, right surround, left surround back and right surround back RCA inputs. The TX-SR606's on-screen setup menu appears on your connected TV and provides a convenient way to change the AV receiver's various settings using the supplied remote control. The onscreen setup menu appears only on TV connected to the receiver via HDMI.
If your TV is connected to the composite video or S-Video Monitor Out or the Component Video Out, use the TX-SR606's integrated LCD display when changiing settings. From the remote, you can set the unit to automatically turn off after as much as 90 minutes or as little as 10 minutes; choices are presented in 10 minute increments. You can display various information about the current input source such as Input Source and Volume; Signal Format or Sampling Frequency; and Input Source and Listening Mode. The display brightness has three settings; Dim, Dimmer, and Normal.This only applies to items sent by Parcelforce, CityLink and MyHermes. Proof of posting will be available. Some drivers will not allow you to open the item to check it, if this happens sign your name with the word "UNCHECKED" next to it as then a claim can be made if damage is found later. We guarantee these items to work on arrival as they are checked and packaged by us before listing and dispatch. If an item does prove faulty when it is received then a replacement will be sent out once we have received the item back and confirmed its faulty and confirmed the serial number and our security mark.
(We must be contacted within 30 Days of you receiving the item). Please note that you will be responsible for the postal costs of returning the item. When a parcel leaves us, it leaves in perfect condition, When received if there is any damage to the parcel or packaging this would have happened whilst in transit, So please take a time to inspect your parcel before signing for it as no claims can be made if you accept a damaged parcel and don't sign for it as damaged. If you dont have time to inspect the item please sign for it as unchecked, In the unlikely event of a item being faulty, when returning to us please ensure you include the item number in with the parcel as well as a description of the fault and your return address, failure to do this will result in a delay in replacing the item.. We will not accept items back if they are not in their original packaging.All items are discreetly security marked and serials number noted to aid fraud prevention and any attempted fraud reported to the relevant authorities immediately. Any legal costs are passed on. The item "Onkyo TX-SR606 7.1 Home Theatre Cinema AV Receiver 5x HDMI Dolby True HD, Master" is in sale since Sunday, May 28, 2017. This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Receivers".ltd" and is located in Norwich. This item can be shipped to United Kingdom.